/*
Please refer to readme.html for full Instructions

Text[...]=[title,text]

Style[...]=[TitleColor,TextColor,TitleBgColor,TextBgColor,TitleBgImag,TextBgImag,TitleTextAlign,TextTextAlign, TitleFontFace, TextFontFace, TipPosition, StickyStyle, TitleFontSize, TextFontSize, Width, Height, BorderSize, PadTextArea, CoordinateX , CoordinateY, TransitionNumber, TransitionDuration, TransparencyLevel ,ShadowType, ShadowColor]
*/

var FiltersEnabled = 1 // if your not going to use transitions or filters in any of the tips set this to 0

Text[0]=["My Account","Here you can change information related to your company's account such as username, password, corporate address and billing address."]
Text[1]=["Quote System","Use this screen to submit a Request for an online quote for a private line circuit."]
Text[2]=["Order System","Use this screen to submit an order for any of FiberNet's services."]
Text[3]=["My Locations","Here you can input locations that you will use frequently on your quote Requests.  There locations will then appear on a drop down menu on the quote Request screen.  You can also input site or technical contacts for each site."]
Text[4]=["My Locations Drop Down","To have frequently used locations appear in this drop down menu, click on the My Locations tab on the Navigational Bar or click on the 'Save in My Locations Checkbox' below when you submit your first quote Request using the location."]
Text[5]=["Building CLLI","Make sure you enter the CLLI code of the A-location or Z-Location, NoT the Serving Wire Center. This is not a required field."]
Text[6]=["Service Level","Please enter one circuit type per quote Request.  If you need to have quotes for multiple circuit types going to the same 2 locations, please use the My Locations drop down menu to pull off those locations."]
Text[7]=["Available Locations","This grid includes 15 locations, including: 1) any location you enter here, and 2) any locations for which you clicked on 'Save in My Locations' checkbox when submitting a quote Request."]
Text[8]=["Contracting Customer Information","This information is autopopulating from the My Account registration page.  Please edit if there have been changes."]
Text[9]=["Billing Address and Details","This information is autopopulating from the My Account registration page.  Please edit if there have been changes."]
Text[10]=["Section 4: Other","You can use this box to input any nonstandard type of payment with an explanation (e.g. security deposit, annual subscription, etc.)"]
Text[11]=["Private Line - Conversions","Please enter a value if the circuit requires a conversion from one protocol to another.  If the conversion that you are looking for is not in the drop down menu, please write it in the notes below."]
Text[12]=["Private Line - Hub at A","If this circuit is a hub or an endlink, please inform whether the muxed end of the hub is at the A-Location or Z-Location."]
Text[13]=["Private Line - Hub at Z","If this circuit is a hub or an endlink, please inform whether the muxed end of the hub is at the A-Location or Z-Location."]
Text[14]=["Save","Click this button to save this order into the Order History.  Saving an Order will not submit it, but will allow you to open the order at a later time, edit it, and then submit it."]
Text[15]=["Submit","Click to submit an order to FiberNet for Approval.  All information entered into this order form is contingent upon receiving FiberNet approval.  FiberNet will send a Firm Order Commitment date after approving the order."]
Text[16]=["Private Line - Framing","Required Fields: For Electrical circuits please input Framing and Line Coding."]
Text[17]=["Private Line - Coding Circuit","Required Fields: For Electrical circuits please input Framing and Line Coding.  For Optical circuits please input protection."]
Text[18]=["Private Line - Optical Circuit","Required Fields: For Electrical circuits please input Framing and Line Coding.  For Optical circuits please input protection."]
Text[19]=["Private Line","Please input hubs, endlinks and mux installation into the Topology option."]
Text[20]=["Private Line - Concatenation","Please indicate concatenation where applicable."]
Text[21]=["Private Line - Quality","You may submit multiple circuits of the same service in this order form, but each circuit will eventually receive its own entry and order number in the order history."]
Text[22]=["Ethernet - Dedicated","For Dedicated Ethernet circuits, please input Circuit Type, Throughput and Protection."]
Text[23]=["Ethernet - Switched","For Switched Ethernet Point to Point circuits, please enter Topology, Billing , committed throughput, burstable rate/Mbps (if applicable) and port interfaces.<hr width=100%>To order a Point to Multipoint Switched Ethernet Hub, please click on Point to Multipoint in the Topology drop-down menu, Set up Aggregation Hub under the Order purpose drop-down menu, Billing method, committed throughput, burstable rate (if applicable) and port interfaces.<hr width=100%>To order an endlink from a Switched Ethernet Hub, please click on Point to Multipoint in the Topology drop-down menu, Set up endlink port under the Order purpose drop-down menu, Billing method, committed throughput,  burstable rate (if applicable),  port interfaces, VLANs and Tagging options."]
Text[24]=["Ethernet - Switched","To order a Point to Multipoint Switched Ethernet Hub, please click on Point to Multipoint in the Topology drop down menu, Set up Aggregation Hub under the Order Purpose drop down menu, Billing Method, committed throughput, burstable rate (if applicable), port interfaces, VLANs and Tagging options."]
Text[25]=["Ethernet - Switched","To order an endlink from a Switched Ethernet Hub, please click on Point to Multipoint in the Topology drop down menu, Set up endlink port under the Order Purpose drop down menu, Billing Method, committed throughput, burstable rate (if applicable), port interfaces, VLANs and Tagging options."]
Text[26]=["DIA-Local Circuit","Please click on an option here if FiberNet is providing a local circuit from our router to your premises."]
Text[27]=["Order History","See a log of orders submitted through our online ordering system and check order status."]
Text[28]=["Order ID","Each Order submission you send into our online ordering system receives an Order ID.  Each Order ID can encompass various services."]
Text[29]=["Order Number","Every circuit or service ordered has its own unique order number."]
Text[30]=["Remember Password","Click on this checkbox to bypass the login screen when you input the FiberNet portal URL. The portal will automatically bypass the log in screen until you log out of the FiberNet portal. To avoid the login screen going forward, exit the browser without logging out. If you wish to enter your username and password everytime you enter this site, do not check this checkbox."]
Text[31]=["Log Out","Logging out will terminate a system session and reset the remember password checkbox, meaning that you will not bypass the login screen the next time you input the FiberNet portal URL. If you wish to log in under a different username, make sure you log out first."]
Text[32]=["Charges Related to Order","You can use this box to input any nonstandard type of payment with an explanation (e.g. security deposit, annual subscription, etc.)"]
Text[33]=["Protection", "For Optical circuits please input protection."]
Text[34]=["Throughput", "If Requested Throughput is not among the menu choices, please input the closest value and write out the actual throughput in the notes section."]
Text[35]=["Term Disclaimer", "By making a Revenue Commitment, Customer agrees that, during the Circuit Term, Customer will order and pay for Services which, on a monthly basis during the agreed term (after any applicable 'Ramp Period' specified above), have monthly recurring charges which are, in the aggregate, at least equal to the Revenue Commitment.  In the event that during any month, Customer's invoice for actual Services used is less than the Revenue Commitment, Customer shall nevertheless be invoiced for, and shall be responsible to pay, an amount equal to the Revenue Commitment."]
Text[36]=["Voltages","Please write any nonstandard voltages in the notes section below."]
Text[37]=["ICB","Please press this button to Request further action on this quote from our pricing managers. Our pricing manager will review this pricing and revise your price quote."]
Text[38]=["Diversity","Check if your Request has any non-standard diversity requirements and please explain requirements in the notes section."]
Text[39]=["Floor Input","If possible, input floor as a simple number - e.g. 1, 2, 3, 4 5."]
Text[40]=["Suite","If possible, Input suite as a simple number - e.g. 101, 201, 304 .."]
Text[41]=["Due Date","The Requested due date does not guarantee completion of the order on any certain date. The FOC will be passed on to the customer by the provisioning and/or customer service teams when available"]
Text[42]=["Site Contact","For site contact please input a person who will be physically at the location to accept the service."]
Text[43]=["Tech Contact","For technical contact please input any additional contacts who may be involved with this order."]
Text[44]=["Termination Point","Please input where the circuit will be dropped off. Depending on the type of order this may require the assignment of a relay rack, panel, port,  hub ID, channel, etc"]
Text[45]=["X Connect Provider","Please specify whether the cross connect to the end user at this location will be ordered by the end user or by FiberNet."]
Text[46]=["Reference Id","Here you can put a reference number or internal ID you can use within your organization to reference this quote."]

Style[0]=["#666463","#666463","#94C282","white","","","","","","","","","","",200,"",2,2,10,10,"","","","",""]
Style[1]=["#666463","#666463","#94C282","white","","","","","","","2","","","",200,"",2,2,40,10,"","","","",""]
Style[2]=["#666463","#666463","#94C282","white","","","","","","","","","","",250,"",2,2,10,10,"","","","",""]
Style[3]=["#666463","#666463","#94C282","white","","","","","","","","","","",600,"",2,2,10,10,"","","","",""]

applyCssFilter()